GD32 Steel Change GearBoston Gear change gears are used primarily on machine tools to provide different cutting speeds while using a constant speed input. All Boston Gear change gears are manufactured with a double key to accept the compound steel bushings that connect two gears together, allowing them to spin on an intermediate shaft. The change gears we stock range from 20 tooth through 128 tooth gears, in one tooth increments, depending upon the diametrical pitch, for a

14 1/2° PA gears are used extensively because of lower backlash and smoother

Click here for spec sheets: CUCTF Spec Sheet

Click here for spec sheets: SNA Spec Sheet

Type: Cylindrical

In addition

Piloted Flange Units

Installation & Operation Manual

Climax Series C801 Single Nut Locking Assemblies deliver a mechanical interference fit and provides a higher torque capacity over alternative keyed connections

Click here for spec sheet: SA Spec Sheet

Boston Gear’s worm gears provide effective power transmission in applications requiring high-ratio speed reduction in a limited space using right angle (90°)

depending upon the diametrical pitch

Click here for spec sheets: CUC Spec Sheet