SKU: 79532106685

CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

Sale price$38.18 Regular price$42.42
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

CrazyF411 ELRS AIO Toothpick Flight Controller (20A)Ah, welcome to the world where flight controllers sound more like elite secret agents than tech components. Let's dive into the fantastical realm of the CrazyF411 ELRS flight controller, a device that screams "I'm not your average circuit board!" First off, for those looking to whisper sweet nothings to their ESP8285 via the ET and ER pads, you're in luck. Simply charm your FTDI tool by connecting its "TX" to the "ET" pad and its "RX" to the "ER" pad,

Ah, welcome to the world where flight controllers sound more like elite secret agents than tech components. Let's dive into the fantastical realm of the CrazyF411 ELRS flight controller, a device that screams "I'm not your average circuit board!"

First off, for those looking to whisper sweet nothings to their ESP8285 via the ET and ER pads, you're in luck. Simply charm your FTDI tool by connecting its "TX" to the "ET" pad and its "RX" to the "ER" pad, and voilà, you're ready to serenade your onboard UART ELRS receiver with the latest firmware tunes. Just remember, a little spark between "+5V" and "E5" pads is necessary for this romantic firmware rendezvous.

Now, let's talk about the main star of our show, the CrazyF411 ELRS flight controller. This little beast comes packed with an integrated UART 2.4GHz ExpressLRS receiver and a 20A Blheli_s ESC that's been pre-tweaked with Bluejay firmware for your flying pleasure. It supports the daring 2-4s power range, ensuring your toothpick drone or long-range FPV drone isn't just flying; it's soaring with the eagles on steroids. And let's not forget the SX1280 radio frequency chip that boasts high sensitivity, a high packet rate, and low latency, making this flight controller the dream date for Race/Freestyle pilots.

The onboard ELRS receiver and MCU are best buds, chatting via UART in a language as seamless as Happymodel EP1's. Firmware updates are a breeze with betaflight pass-through or WIFI, leaving more time for flying and less for fiddling. Pre-loaded with the ELRS V3.0.1 firmware, this flight controller is ready to replace the ELRS X1 in your Crux35, making it the new cool kid on the block.

And for the onboard ESC? It's not just any ESC; it's a powerhouse upgraded to EFM8BB21, supporting the 2-4S LiPo/LiPo HV range with 20A of continuous current and peaks that flirt with 25A. It's like having a bodybuilder ready to lift your drone's spirits.

On the communication side, the onboard UART ExpressLRS 2.4GHz Receiver is a chatterbox with options ranging from 25Hz to 500Hz, ensuring your drone never misses a beat. And with the ExpressLRS V3.0.1 firmware, it's as updated as your social media feed.

Binding is like a mystical dance, a three-step process that ends with a green LED light show indicating a successful hookup. And should you wander into the land of LED signals, remember: green means go, double-flash is your cue to bind, a slow flash is a lonely heart, and fast flashing is just the receiver showing off its WiFi mode.

So, there you have it, a flight controller that's not just part of your drone but the soul of your aerial aspirations. Whether you're dodging trees or threading through hoops, the CrazyF411 ELRS is your ticket to the big leagues. Just strap in, update that firmware, and let the sky be your playground.

Features

  1. Integrated High-Fidelity ExpressLRS Receiver : With its UART communication and the sleek SX1280 RF chip, this receiver is like the high-speed internet of the skies. It delivers low latency, high packet rates, and a sensitivity that could detect a fly's whisper from across the room. Perfect for pilots who value responsiveness over everything else.
  2. Robust 20A Blheli_s ESC with Bluejay Firmware : Imagine strapping a rocket to your drone but with precise control. This ESC can handle up to 20A currents, making it ideal for 2-4S toothpick drones or long-range FPVs that crave power and agility. It's like giving your drone a pair of sneakers with wings.
  3. Compact Powerhouse Design : With its petite dimensions and a mounting pattern tighter than your skinny jeans, this FC is a masterclass in space efficiency. It supports 2-4S Lipo batteries and includes a built-in 5V 1.5A BEC, ensuring your drone stays powered without the bulk.
  4. User-Friendly Firmware Update & Binding Procedure : This FC takes the headache out of firmware updates and binding. With options for betaflight pass-through or WIFI for updates and a simple yet effective binding process, it's as easy as making instant noodles - minimal effort, maximum satisfaction.

Specification

Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM42688P or BMI270 (SPI Control)
Mount pattern: 25.5×25.5 M2
Size:32*28*9mm
Power supply: 2-4S Lipo battery
Built-in 20A Blheli_s ESC each
Built-in Betaflight OSD(SPI Control)
Built-in UART ExpressLRS 2.4GHz receiver
Built-in 5V 1.5A BEC
Flight controller firmware target: CRAZYBEEF4DX
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Currents: 20A continuous peak 25A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: Bluejay 0.18.1Firmware target: F_H_40_48_v0.18.1
Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard UART ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHzAntenna plug: IPEX
Telemetry output Power: <12dBm
Receiver protocol: CRSF
Default firmware version: ExpressLRS V3.0.1
Firmware target:HappyModel EP1/2 2400 RX
Onboard voltage and Amperage meters settings Voltage meter scale setting 110
Amperage meter scale setting 470

Connection Diagram Pinout

How to Bind your receiver

  1. Supply power to the flight controller by plug USB, wait until the green LED on the FC is off, immediately turn off the power, and then repeat again the above steps. When the FC is powered on for the third time, the green LED light will start to double-flash, which means that the RX enters the binding mode
  2. Please make sure your ExpressLRS tx module firmware is v3.x.x. And go to ExpressLRS.lua from "TOOLS" menu of your radio transmitter. Then hit [Bind] to binding with the onboard ExpressLRS receiver. The green LED should blinking slowly first then turn to solid, that means binding was successfully. If the green led still keep double flash after binding ,please change Model Match tab value from "off" to "on" or from "on" to "off"

Receiver LED status meanings:

Green LED solid means bind successful or RC link established; Green LED double-flash means get into bind mode; Green LED flash slowly means no RC signal input from TX module; Green LED continuous flash fast means ExpressLRS wifi enabled.

Included

  • 1x F4 AIO ESC RX Board
  • 1x Cable with Connector
  • 1x bag of Screws & Standoffs
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 79532106685

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 2290 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
Brit_Abroad747
Massapequa, US
★★★★★ 5
Watch with day & date
Nice watch, light in weight. Looks good with the grey background. Has the day and date too, just wish they were a little larger, for easier reading.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 24, 2025
A
Verified Purchase
Amazon Customer
Cuba, US
★★★★★ 5
Amazing buy!
Love it. Very nice looking and seems to keep time well. Incredible value!!!! I really enjoy wearing this watch!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 26, 2025
M
Verified Purchase
Maidelyn Diaz
Lake Worth, US
★★★★★ 5
Es muy elegante
Color: 3316:white band white dial
The OUPINKE Automatic Two-Tone Skeleton Watch is a stylish timepiece that blends luxury design with mechanical craftsmanship. Its gold and silver stainless steel construction gives it an elegant, premium look suitable for both formal and casual occasions. Design & Appearance: This watch stands out with its two-tone bracelet and gold-accented bezel, creating a bold and sophisticated aesthetic. The dial features crystal-style hour markers, multiple subdials, and a visible skeleton window at the bottom that showcases the internal movement. These details add a high-end feel often associated with more expensive watches. Movement & Performance: It uses an automatic mechanical movement, which means it winds itself through the motion of your wrist—no battery required. This is a major advantage for watch enthusiasts who appreciate traditional watchmaking. The watch also includes useful calendar features such as day, date, and month indicators. Build Quality: The stainless steel case and bracelet feel solid and durable. The polished finish enhances its luxury appeal, although like most polished watches, it may show fingerprints or small scratches over time. Comfort: Despite its robust design, the watch is comfortable to wear. The bracelet is well-balanced, and the clasp keeps it secure on the wrist.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 18, 2026
G
Verified Purchase
GJK
Natrona Heights, US
★★★★★ 5
Exceptional quality
I have only had the watch for a few days, but Oupinke watches are very high quality. It keeps time very well and serves as an attention grabber. Great value for the money. It isn't easy to determine where it was made, but it is a Chinese company. Don't stop there with preconceived ideas about cheap products and low quality from China. These watches are exceptional, high-end, and dedicated to creating a brand that endures and stands for quality, rather than simply turning a profit. I would put this watch against those that cost 3-4 times as much. If you are a watch enthusiast, they are worth adding to your collection.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 17, 2025
S
Verified Purchase
Scott Mead
Grantham, US
★★★★★ 5
Value
Color: GZ3255Z:Two tone band&Blue dial
Higher quality than I expected, especially for the price. I have recieved lots of compliments, but I have never told anyone what I paid for it. I use it for a daily wear, and when I go out for dinner.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 2, 2025

recommand products