J1939 Type I 'Y' Cable for LMU3640/Veos (CAN/J1708/CAN2)Contact for volume pricing or to place special orders 9 pin J1939 Type I connector 'Y' cable to 16 pin dual row connector for CalAmp LMU3640 Veosphere devices. The 'Y' cable has 2 parts including: 9 pin J1939 Type I passthru length of 0. 3 meters (or 1 foot), with all 9 connections populated 16 pin dual row length of 2 meters (or 6. 56 feet), with connections populated for Power, Ground, CAN, J1708, and CAN2 Equivalent cable for 5C909M 2

The Cable connects the Suntech ELD device to an Android tablet providing both a serial communication and charge cable through a direct connection

All 16 pins are connected between the 3 connectors

The table below shows the six connections that are mapped from the j1939 to OBDII

3M in length

5-pin single row Serial 1 connection

but all 9 pins are connected between the j1939 9-pin type II connectors

The card will can be assigned a custom 10-digit ID by using this USB Card Reader/Writer

In addition

The Type II male j1939 housing will plug into both the Type I and Type II female housing

The USB to 5-pin Serial UART/TTL Conversion Cable can be used with CalAmp or other products that utilize the UART/TTL serial communication

and 495 that have high temp tolerances of 250 degrees Fahrenheit recommended for more permanent installation)

The Cable connects the UART serial device to an Android tablet providing both a serial communication and charge cable through a direct connection