Glass in building. Basic soda-lime silicate glass products - Definitions and general physical and mechanical properties1 Scope This Part of this European Standard specifies and classifies basic glass products and indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria. Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of EN 572 specific to each product

Annex D (informative) Flow chart — Data acquisition

Relative permittivity and loss tangent are detailed in BS EN 61189-2-719 to evaluate signal attenuation and to ensure that all-important information is recorded over the appropriate frequency range to accurately capture the magnitude of the resonances' peaks

including where the internal working voltages of the Ex product exceeds 15 kV

a)       Supplied with 2nd family gases from medium pressure gas distribution systems with a maximum operating pressure exceeding 75 mbar but not exceeding 2 bar and with a design maximum incidental pressure of 2

BS EN 12229 specifies a procedure for the preparation of test pieces of needle-punch sports surface that is used for applications offering cushioning and reinforcement against subgrade surface irregularities

The electrical cone penetration test (CPT) consists of pushing a cone penetrometer using a series of push rods into the soil at a constant rate of penetration

for their ability to resist the influence of high pressure

- if appropriate

BS EN 1991-1-3 gives guidance to determine the values of loads due to snow to be used for the structural design of buildings and civil engineering works

Washbasins have come a long way from when they were simply large bowls that held the wastewater when the user was shaving or washing his/her face or hands

handling and erection for construction of steel bridges

A range of supplementary inspection procedures that may be invoked