1U Rack Mount for 3x StarTech 10-Port USB-C Hubs3D Printed 1RU rack mount for 3x StarTech 10 Port USB C Hubs (Model: 10G8A2CS USB C HUB). Your Hubs will slide into the unit from the front and there are holes on the bottom that line up with the mounting holes if you want to fasten the Hubs to the mount. This listing is just for the Rack Mount, other photos showing Blanks etc are just for example. Does not include Rack Screws, Cage Nuts, or Network equipment. Do you need to have text or a logo

If you don't need the Keystones

This mount also works with the POE+ Hat (as shown in Photos)

3D Printed 2RU rack mount for the Minisforum MS-A1 AMD Ryzen Workstation Mini PC

The Sonos AMP slide into the frame from the rear and then is held in place by the Back Cover which is screwed on to the Fronts

The Home Assistant Blue slides into the frame from the back after removing the back plate

NOTE: You will need to pair this with another ModMount item (Like some Blanking Plates

3D Printed 2RU rack mount for the Netgate 2100 PFSense Security Gateway

remove the 4 screws holding each Back in place

NOTE: You will need to pair this with another ModMount item (Like some Blanking Plates) to make a full 2RU Width

NOTE: You will need to pair this with another ModMount item (Like a pair of Blanking Plates) to make a full 2RU Width

3D Printed 1RU rack mount for Dell Optiplex 3000/5000/7000 Micro PCs

EliteDesk 705 G3 - G5